- #Run 8 train simulator locomotives models how to#
- #Run 8 train simulator locomotives models generator#
- #Run 8 train simulator locomotives models software#
- #Run 8 train simulator locomotives models download#
#Run 8 train simulator locomotives models download#
You can download a blank file that enables you Note how I set up the function buttons which Next time we'll talk about DPU's and Fencing, what it is and what it does and how I use it. Just hit the Pantograph button again and your good to go! Just remember if you do this and you activate this button in other words you turn off the Gen Field and you forget it's off and your Train doesn't move no matter how much throttle you give it and you've racked your brains trying to figure out why this dumb Train doesn't move, it's because you forgot to turn the Gen Field back on. Click "Change" and set it for the "P" button which is the Pantograph button on your Raildriver and that's it. Look for "CB_Gen Field" and click on this. To set this up, go into the Raildriver tab in RUN 8 (F1) and look where it says "Button Mapping" on the left of this screen. It's best I think to practice this even if your using single player as you may very well end up doing multi-player some day and you'll be in the habit already on doing this. You would mainly use this if your doing a local which calls for a lot of coupling and uncoupling of cars and your working with someone else say on multi-player. This assures the Conductor or Brakeman that when they need to get between cars with the Train standing still to do any work that there will not be any unintended movement which could be a very bad thing if someone is between cars.
#Run 8 train simulator locomotives models generator#
This enables the Engineer to turn off the Generator Field when the Conductor request what's known as "Set and Center" to BNSF or "Red Zone" to Union Pacific or "3 Step" to CSX and Norfolk Southern.
The only thing I changed was the setting up of a Generator Field button using the Pantogragh button (that's the green button to the left and just above the function buttons). Oh, their still legible but if I had it to do again, I wouldn't do this.Īlso, when setting up your functions buttons (the 28 blue buttons shown in the picture below) I just used the default set-up that RUN 8 installs which seems to work fine for me.
Some have suggested coating these when first applied with nail polish which is what I did but all it did was smear the print of the label's so not sure I would recommend this. When you get your Raildriver, the stickers PI Engineering gives you to apply to the different controls tend to wear out after a while.
#Run 8 train simulator locomotives models software#
It's a very helpful resource.Īnother thing to remember about using Raildriver with RUN 8 is Raildriver is native to the RUN 8 software meaning, everything from setting up Raildriver to calibrating Raildriver is done within RUN 8, no external software is needed to use Raildriver with RUN 8 which in my opinion makes things much easier. Don't be concerned with not doing The Depot servers as many people here do only single player and ask and answer questions. You can also hop on some forums such as The Depot Forums where there is a lot of good information and Everyone here is extremely helpful. The best thing to do is just start using your Raildriver and you'll get a feel for how you like things to be.
#Run 8 train simulator locomotives models how to#
There are just somethings your better off using the keyboard for in conjunction with the Raildriver that are simply easier to do using the keyboard versus using Raildriver.Īnother thing to keep in mind with Raildriver is that everyone has their own preferences on how to set up the Raildriver and how to use it so there is no one set answer to alll your questions. Now I used the keyboard exclusively for a very long time which is something I highly recommend as Raildriver does most everything but not all.
It adds a trulistic feel to the experience of rolling down the rails with a long, heavy train. I have found the Raildriver to be a true enhancement to my Run 8 Train Simulator experience. I will also add content via other pages of this blog and external links to other websites that I feel are relevant to my enjoyment of this awesome Train Simulator and Hobby! This section of my blog will be meant for my experiences with Run 8 Studios Run 8 Train Simulator with a focus on documenting the runs I do when on The Depot+ server.